Newport Model Railway Society

Click here to edit subtitle

What we did in January to June 2018

Friday 29th June 2018

Friday 22nd June 2018

WagonMan's wagon and carriage works is in full production now, with Al having fully and finally retired.
This evening's project is the fourth out of four LBSC 4-wheel coaches. This one's a brake 3rd which featured very basic seating. By mid evening it had progressed from flat sheet to this far. The duckets now need annealing so they can be bent, so that needs a gas hob.

8th June 2018 and 0 gauge Test Track running day, 9th June

1st June 2018

Following on from last week's reference to Christmas presents here are more goodies received by Rob. There are five of the new 24t hoppers from Accurascale, a new manufacturer. These have had the 00 wheels replaced by P4 ones, a very easy task. They are well detailed but will need additional weight.

27th May 2018

20th May 2018

Braving the M4 with its traffic and closures, Bernie came with a box or two of wagons fitted with Dingham couplings, plus some locos for testing them. As its was a test it was not surprising that a few were failures, and we did some revision and firming up of dimensions and clearances around the coupling hook and loop. More testing will be required after modification.

13th May 2018

4th May 2018

This ended up being a quiet night with just two of us present. This gave us space to work and think, however.
The stacking, storage and transporting of LMJ has been ignored for some time. Its been a problem that we haven't an immediate solution for and has become a bit of an impediment. Paul W has been worrying at it for a little while, so tonight we took the opportunity to move out some boards and see what was possible.

28th April 2018

And now for something completely different.
This is in 7mm scale from the growing American collection of Mike Edmunds. Not content with N gauge, OO gauge and P4, he has now been lured to 'the dark side'.
Mind you it was an absolute bargain from that well-known auction site.
Finally for this week, on a disappointing note, I have to record the we were unable to get enough members available to operate Abergavenny Blackbrook at the Bristol Show and rather embarassingly had to withdraw. I can't recall us having done this before. Fortunately the show organisers have been able to fill the gap.

23rd April 2018

This report is a bit delayed because we wanted to record a momentous (?) event. We have finally said goodbye to the last part our O gauge layout, Hazelhurst. We've passed it on to the West Wales group who took it away today in a van. We had some fun with it and learnt a lot that has helped make its successor, Frecclesham, a success.

13th April 2018

The big event in the model railway world locally is NEWGOG, which is run by long-term club member, Fred Lewis. Also involved are Andrew Jamison showing his work-in-progress layout, Brade's Siding, in public for the first time (more views here) and YTS demonstrating battery-powered radio-controlled (BPRC) locomotives. 

Meanwhile back at the clubhouse experiments with lighting were underway on ABB with separate banks of LEDs being installed for dawn (red), morning, noon afternoon (all white) and twilight (red) light, each controlled by their own faders. We also trialled blocking out external light using a black sheet to avoid unintended shadows or bright spots on the layout.

Easter Weekend 29th March to 3rd April 2018

We took Frecclesham to the York Show  - a long weekend, loading the van on Thursday; travelling up and erecting the layout on Friday; operating Saturday, Sunday and Monday with a visit to the National Railway Museum and a journey back to Newport on Tuesday. All rather exhausting but a jolly time was had by all, the layout worked well and garnered several favourable comments and a few potential invitations to other exotic far-flung locations.

23rd March 2018

We haven't seen Rob Foot for a few weeks but this Friday he turned up with this delightful loco from Kernow Models.

16th March 2018

The common way these days to display the name of your layout is to get a mock BR station totem board made up. We have them for Frecclesham and others. But with Abergavenny Blackbrook being a long name we wondered how we could fit it all in to a totem without it appearing too small. So to break with the norm and make things a bit different we opted for laser cut letters in the appropriate font to mount on a board on the fascia.

9th March 2018

4th March 2018

Well, today was meant to be the day of the Open Day but as you might have seen elsewhere we had to postpone the event due to Storm Emma. When we have a new date we'll update the 2018 Open Day page.

But life goes on and eagle-eyed readers will note that this week's picture has the track gauges in different positions from last week's. Happily this is because last week's exercise in gauge widening was successful and we've moved onto another tight spot. Hurrah!

The rectangular brass block at the botton of the picture is a Roger Sander's 'Mint' gauge, which is available (to members) from the Scalefour Society and is a boon for finding those tight spots.

25th February 2018

With nine days to go to the club Open Day Andrew was working on a building for his Brade's Siding layout, we exhumed LMJ's fiddle yard and inspected it for failed rail-sleeper soldered joints (and found far too many) ...

Our hope is that the butanone will soften the chairs enough such that when the gauge-widened gauges (denoted by the single, double or triple rings at the middle of the barrels) are removed after the chairs have re-hardened the tight spot will have disappeared. Tune in next week (or, better still, come to the Open Day and see if stock falls off the track) to see how successful we were.

18th February 2018

So after weeks of preparation we were off to the Monmouth Show with Abergavenny Blackbrook on Sunday. Well, we actually started on Saturday by taking the layout there, erecting and testing it. Not too much hard work for three of us. One of the cars is shown below, ready to depart. See more of the story of transporting and erecting the layout on the Moving ABB page. Here are some snaps from the show.

9th February 2018

One week until Abergavenny Blackbrook has its first outing to Monmouth next week (next week!) so test running, DCC decoder setting, wheel back-to-back checking, coupling adjusting, pick-up tweaking, short circuit locating and more test running were the order of the day. The coil of solder is testament to Chairman Dave's work in re-wiring the relaid section of track (see 26 Jan).

2nd February 2018

26th January 2018

With three weeks to go until ABB's first outing we ran into serious problems - coupled trains were spontaneously splitting when being hauled into the fiddle yard. Investigations showed some unacceptable rises and falls in the track levels so Chairman Dave did several stints of overtime with some remedial tracklaying.

19th January 2018

Development of the scenics on ABB has started with the formation of the contours for the cutting that will form the scenic break. We have used expanded PVC foam on an 3mm MDF base, which will allow sections to be worked on away from the layout itself.

And then, after carving the foam the with a bread knife we get closer to the final contours.

With the front fascia in place framing the scenic work you get a good idea of what the finished effect will be.

Meanwhile following successful trials and emboldened by their success on Frecclesham we have decided to standardise on Dingham couplings for ABB so Chairman Dave has been busy fabricating and fitting them to stock. And Rob is coming to the end of the marathon of assembling all the fiddle yard cassettes.

12th January 2018

All the ballasting on Abergavenny Blackbrook is now finished, though still needs to receive its final colouring, Meanwhile, YTS has got most of the electomagnets working from the control system so we can get on with testing operation of both the stock and the coupling system. We'll test stock with both Alex Jackson and Dingham couplings before making a final decision.

So we are trialling Dingham autocouplers for Abergavenny Blackbrook. We use this type of coupling on our 7mm layout Frecclesham and are pleased with their performance. Like many uncoupling systems they can go out of adjustment and gauges are essential. Here are the initial assemblies in 4mm.

5th January 2018

YTS has progressed with the installation of the control system on ABB  for the coupling electro-magnets to a point where we were able start operational trials. The control system worked fine but unfortunately the magnets did not provide enough oomph to move the Alex Jackson couplings on LBH's wagons reliably. So further work is required and ABB's first outing in mid-February is fast approaching.

Post-script 9th January By modifying the Alex Jackson couplings slightly, adding some soft iron wire (with its superior magnetic properties) YTS demonstrated that the magnets would be powerful to operate them.